Converting 351W To Roller Cam
Converting 351W To Roller Cam. Chatsworth, ca (la) nov 9, 2009. On roller block the lifters galley are.
Hi guys, i have a 72/73 351w block that i would like to convert to use a roller cam and lifters. Ford mechanical roller camshaft part number: 1984 1/2 mustang gt convertable, 85k original miles.
#8 · Oct 12, 2007.
If using your 69 block, use the link lifter setup as drilling and tapping for the spider weakens the cam bearing bulkhead, causing cracks over time. Be the first to review this product. You need to get a small base circle roller cam.
On Roller Block The Lifters Galley Are.
Cam and lifters, hydraulic roller tappet, advertised duration 272/278, lift.525/.525, ford, big block fe, kit. But in order to do this, you will have to use a small base circle cam since the lifter bosses are not as tall in the 351w. 1984 1/2 mustang gt convertable, 85k original miles.
For Engines That Did Not Come From The Factory.
You more torque and horsepower for any given grind, roller cams wear at. You will need to get a small base hyd roller cam. Drill and tap two holes, and make sure the dog bones sit flat.
Change Cams, The Open And Close Ramps Of The Lobes Are Faster, Giving.
For engines that did not come from the factory with hydraulic roller cams) (note: Cam and lifters, hydraulic roller tappet, advertised duration 272/278, lift.525/.525, ford, big block fe, kit. I think the 351w blocks were cast for rollers in 1993;
Hi Guys, I Have A 72/73 351W Block That I Would Like To Convert To Use A Roller Cam And Lifters.
First you have 351 not 302 inches, and second a good flat tappet will give you a lot more power. The gains of the roller cam will not offset the losses of the small outdated profile. Keep the old 351w block and use the link style lifter set.
Post a Comment for "Converting 351W To Roller Cam"